NEXON BeastShock Industrial Impulse generator 10J Generation 6 with GPS

NEXON BeastShock Industrial Impulse generator 10J Generation 6 with GPS

This electric fence pulsator is recommended for domestic and wild animals.

The difference between simple BeastShock controllers and those equipped with GPS lies in the fact that those with a GPS system can be controlled remotely, and we always know its location. With the help of the NEXON GPS application installed on your mobile phone, we can track the device's route in real-time, which can also play an important anti-theft role.

Additionally, with the help of the application, we can inform ourselves about the following:

1. The device is functioning correctly, and the battery voltage is normal
2. How the device operates (impulse speed and power)
3. The battery voltage has dropped below the critical level
4. The fence voltage is low, verification is needed (this may be caused by wire breakage or overgrown vegetation)

Generation 6 comes with improvements over older models:

1. Water-resistant (IP64)
2. Protection against overvoltage and reverse polarity of terminals
3. More solid and robust construction

Attention!

• When the battery voltage drops below 11V, the device emits a rapid intermittent red light signal.
• If the voltage drops below 10V, the device shuts down completely and does not emit any signal. It will automatically restart only when the voltage rises to at least 11V.
• If the device receives an overvoltage above 16V, it automatically shuts down and signals the defect with a rapid intermittent red light signal.

You can sleep peacefully or enjoy a vacation because you always know exactly what is happening with your fence. You can control and monitor the device's status from any distance even while resting in bed, and you have the ability to adjust the speed and power of impulses or turn it on/off.

With the purchase of a BeastShock controller with GPS, you receive the NEXON GPS application and monitoring through a subscription for 3 (three) months Free. After the 3 months expire, renewing the subscription costs 5 euros/month + VAT, and if you do not wish to extend the subscription, the device can operate normally, but you will not have access to monitoring and control through the application. For example, if you do not use the device during winter, you do not need to renew the subscription for that period, and when you renew again, you can use the application as before.

IMPORTANT!

For the GPS system to be functional, a signal (including at ground level) from Orange, Vodafone, or Telekom and an internet connection of at least 3G are required. The network connection may be hindered if the device is hidden in a bunker or a closed metal box. In case the device is stolen or disconnected from the power source, the internal battery continues to function for 4-5 hours and its route is recorded. After the internal battery is drained, we receive new information only after it is restarted and has a mobile signal. In this situation, you have the opportunity to recover the device.

The primary role of the GPS system is the comfortable control and monitoring of the device, with tracking and locating being secondary roles. SC NEXON DYNAMIC CORPORATION SRL does not assume any responsibility for stolen and lost devices.

The BeastShock pulsator continuously monitors the fence's status and battery voltage. If the fence breaks and significantly drops due to excessive vegetation or the battery voltage falls below the critical level, these malfunctions are signaled by the pulsator device through a LED.

Key Features

• Lightweight: Facilitates easy installation and handling.
• Highly Robust Design: Ensures long-term durability and stability.
• Versatility: Perfect for cattle, horse, and sheep farms.
• Enhanced UV Resistance: More durable compared to traditional glass fiber poles.
• Smooth Surfaces: No unpleasant glass fiber residues on the skin.
• Complete Set: Delivered in a pack of 10 pieces.

Technical Specifications

Power Supply Voltage:	12V DC / 230V AC (requires power adapter)
Adjustable via Application:	- Impulse Power - Impulse Speed
Input Energy:	14J
Output Energy:	10J
Peak Voltage:	13,500V
Maximum Route Length – Short Grass:	80 km
Maximum Route Length – Medium Grass:	45 km
Maximum Route Length – Tall Grass:	22 km
Box Size:	190 mm x 290 mm x h105 mm
Device Size:	175 mm x 220 mm x h80 mm
Device Weight:	1490 g

• The device can also be powered at 230 V using a power adapter (which can be purchased separately).
• The device has a port where a BeastShock Warning device can be mounted, which helps signal device and fence issues from a maximum distance of 8 km.

Dimensions

• Box Size: 190 mm x 290 mm x h105 mm
• Device Size: 175 mm x 220 mm x h80 mm
• Weight: 3 kg

Package Includes

1x	BeastShock Industrial Electric Fence Pulsator 10J Generation 6 NEXON with GPS
1x	Battery Power Cables, Length 1.80 m
1x	Grounding Cable 200 cm
1x	Electric Fence Wire Connection Cable, Length 1.25 m
1x	Warning Plate
1x	BeastShock Warning Device, Length 1.80 m
1x	User and Installation Manual

Warranty

• Individuals: 24 months
• Legal Entities: 12 months

IMPORTANT!

Before operating, carefully read the instructions in the manual!

We make every effort to ensure the accuracy of the information on this page. Occasionally, there may be discrepancies: photos are for illustrative purposes and may include accessories not included in standard packages, some specifications may be changed by the manufacturer without notice, or may contain operational errors. All products on the site are available while supplies last.